Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: BLiSsTeX's VVL Dyno Sheet (stock/untuned)

+ Reply To Thread
Posts: 1-10 of 59
2009-12-15 17:05:09
#1
BLiSsTeX's VVL Dyno Sheet (stock/untuned)

Mods are



SR20VE (JDM Engine Zone)
Fidanza LIGHT flywheel
Falcon Stg 4 Clutch (4 puck sprung)
UR Pulleys
Ebay SSAC knockoff header
2 1/2" exhaust
Calum Basic
B15 Tranny
Stock rubber intake hose w/ noname filter


1st pull made 184
2nd pull made 186
3rd pull made

2009-12-15 17:07:21
#2
Obligatory: What rpm did you switch the cams?
2009-12-15 17:08:57
#3
we tried @ diff settings and when switching @ 6k this is what we yielded.... the 1st pull was @ 5k 2nd @ 5.5k and the 3rd @ 6... if u look @ the graph, u can clearly see the activation....
2009-12-15 17:41:13
#4
Yah that's what I figured.
Personally I'd rather have the smooth power curve you get by activating lower and give up the 4 HP up top (and I bet you're not losing anything actually).
But you keep on truckin'.
2009-12-15 17:45:14
#5
The AFR was at 10.2-10.5?
2009-12-15 17:56:09
#6
cool
2009-12-15 18:02:59
#7
Originally Posted by BenFenner
Yah that's what I figured.
Personally I'd rather have the smooth power curve you get by activating lower and give up the 4 WHP up top (and I bet you're not losing anything actually).
But you keep on truckin'.


Yea but we didn't have time to play with it much as it was a dyno day and had over 15 cars waiting.

Originally Posted by mirrortints
The AFR was at 10.2-10.5?


Yes it was running rich, it has alot of potential in that motor to bad he won't see it .
2009-12-15 18:12:02
#8
Looks good although yeah id drop that cam switch to about 4.8k.
2009-12-15 18:21:37
#9
Originally Posted by cory
Looks good although yeah id drop that cam switch to about 4.8k.


It daily switches @ 5 and rolls out.. freak motor?
2009-12-15 18:27:01
#10
nope not a freak motor
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top