Thread: " I'm going VE" parts list (model specific)

I just want to know what's needed for a (complete) ve swap model specific. I know alot of the parts will be the same for most models but thats the fun. This is sort of a parts list so people can quicK refrance.

B13:
SR20VE
MSD 8969 digital switch
VE compatibale Header
Jwt or calum ecu
B13,B14,VE distributor (Ga16de owners)
B13,B14, B15,NX2K,G20 Transmission(Ga16de owners)
3/4 to 5/8 hose adapter

B14:
SR20VE
MSD 8969 digital switch
VE compatibale Header
Jwt or calum ecu
B13,B14,VE distributor (Ga16de owners)
B13,B14, B15,NX2K,G20 Transmission (Ga16de owners)
3/4 to 5/8 hose adapter

Im going to tell you before Shawn B does.

SEARCH, SEARCH and SEARCH!!!

Its been gone over, written up, documented, photographed, stickied, copied, pasted, built and driven in every concievable form. There is no further research to be done as far as swaps go. Its been done, all you have to do it find it which really isnt that difficult.

I will search, just it will be difficult for each model. I just thought it would be faster if everyone helped out for a possible sticky? I mean I added what I knew from my head, let me know what to add to each section. Simple. Over time this thread will generate alot of views because it just makes life easier. Why search when all the info is 1 place? If you go to a restarant everything to eat is on the menu not under a table or in the bathroom. I have nothing to hide.Unlike most here.

B13:
SR20VE motor
MSD window switch(works great ihave it)
Header of your choice
Calum, JWT, or Apexi SAFC to tune the car

All you need to do for the swap is change the water temp. sensor to the US one. And extend the Idle control wiring so it can reach the sensor.

Thats all i had to do this last weeken on my brothers car. And about the heater hose if you buy 3/4 size it will fit on both sides Im sure because i did it.

All this is the same for the P10 G20 I have a VE in my P10 that i just did 3 weeks ago

Hey Thanks, About how much Lenth of 3/4 heater hose will we need? I want to add that in.

theres an adapter thats cheaper an in my opinion better..



less then 5 bucks from your local auto part store

Are you saying that you can use the stock heater core hoses with that adapter?

correct sir! its a 3/4 to 5/8 hose adapter that can be found in your local auto parts store.

you only need one, since only one of the hoses is different size

On my B14 I'm using a B15 distributor because it clears the solenoids better than a stock B14 does. Still have to modify the lower part like the B14 distributor for it to fit.

You can add what beefy said for all models. Cut the bottom leg of the Distributor