Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: VVL cuts out(fixed, but new question...)

+ Reply To Thread
Posts: 21-30 of 30
2009-10-31 19:10:29
#21
never play with needles..

i did once and now i need a new cluster.
2009-11-01 13:39:54
#22
get an safc. it'll read the correct RPM and other options too. I love it after I got mine.
2009-11-02 20:21:18
#23
this is why you get one of these - kill 2 birds with one stone, the cam activation and rpms:
2009-11-03 04:24:49
#24
That would look pretty goofy on the dash dude
2009-11-03 05:12:01
#25
Ok, man I had this problem and just could not figure it out. I was thinking it had to be the tach signal or some kind of electrical thing........Well it ended up being the selinoids and the aparatus was "gunked" up, so after some intensive cleaning with gasoline I was able to get it all out and guess what the VVL engaged and stayed engaged.

So take that whole piece off, take the solenoids off and clean everything including all those passageways in the VVL apparatus.

Goodluck!
2009-11-03 05:18:13
#26
Originally Posted by jonwepa
Ok, man I had this problem and just could not figure it out. I was thinking it had to be the tach signal or some kind of electrical thing........Well it ended up being the selinoids and the aparatus was "gunked" up, so after some intensive cleaning with gasoline I was able to get it all out and guess what the VVL engaged and stayed engaged.

So take that whole piece off, take the solenoids off and clean everything including all those passageways in the VVL apparatus.

Goodluck!


Reading > You

It was my RPM signal. I ran the wire into the cabin and spliced it into the tach signal and it's all better.

Thanks though.
2009-11-03 05:41:27
#27
Originally Posted by LukaMcCloud
Reading > You

It was my RPM signal. I ran the wire into the cabin and spliced it into the tach signal and it's all better.

Thanks though.


oops........:o


Well good for you then!
2009-11-03 06:09:23
#28
It's cool, man. I just had to give you a hard time. It's been done for a couple weeks. We've recently been discussing my tach and speedo.
2009-11-03 16:34:54
#29
Yea, that MSD 8969 is big and definetly would not work trying use it as a tach in the cabin. You can get a Greddy MSS to put on the steering column to use for a tach and to switch the cams.
2009-11-03 18:29:48
#30
Yeah I'm noy really worried about it
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top