Originally Posted by
SR20GTi-R Have you pulled the solenoid assembly? Sometimes old sludge builds up in there causing issues like these.
Easy fix, just clean it out with some carb or brake cleaner. Enjoy popping cams again!
that in no ways explains their cold temps.
regardless of what harness you're using, the sensor that reads to the ecu needs to be the sensor that goes with that ECU, and the sensor that reads to the gauge needs to be with the gauge (some b chassis cars only have one sensor for both, and the cluster reads from the ecu)
that means for those of you running a DE harness/ecu, your temp sensors need to be DE sensors, and your cluster gauge sensor also needs to be a DE, whether its a b13, 14, or 15.
most of you are smart enough to know this, so for most, that explanation is a waste of time.
that leads to why it's probably the T-stat. when the car warms up, the thermostat stays closed so that the coolant heats up to bring everything up to operating temp. when its hot enough, a wax piston or bimetallic spring in the thermostat opens it to allow the coolant through radiatior to regulate temperatures. it then closes and opens as the coolant cools and heats up. its very possible that over the summer your Tstats got stuck open. you wouldn't have noticed because ambient temps were warm enough to keep things warm, and the operation of the engine heated it up enough to run normally. you don't see it with a cluster gauge, but if you have an aftermarket watertemp gauge, you get to watch as your coolant temp fluctuates about ~20*F between the opening and closing of the Tstat, and the rad and fans. again, a lot of you know this, so it's just for those who dont.
most of you probably have a DE lying around, its thermostat probably fits. test both with boiling water.
as for the solenoids not activating, a lot of cars with a variable valve lift mechanism (including Vtec) won't engage solendoids when the engine is cold.