Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: header and exhaust

+ Reply To Thread
Posts: 21-30 of 43
2009-09-17 18:52:09
#21
Bluey a word of advice:
You might want to watch what you say here bud. With 35 posts your not gaining much respect with threads like this.

Best of luck.

Dudeman
2009-09-17 18:55:12
#22
Originally Posted by bluey
@Mr canx2k
I am sure leeching is a common practice for most members because thats how we all decide what setup we go with. so while you like to be a wise Azz, if you don't have anything meaningful to contribute other than being a Mr know it all which the threads have proven wrong keep quite .
http://www.sr20-forum.com/nx2000/22693-gotta-ask-what.html

P.S while u at it "spoon-fed" Smart Azz go practice your speech facing the wall

To eveyone else thanks again!

I should change the topic to Learning English 101 from Dick Heads


Keep quite what? Keep quite?!?! Damn man, how about English 10? As in grade 10. Because clearly you have issues. Also, refering to my question, which you laughably took the time to F*CKING SEARCH FOR (as opposed to using it before posting your rediculous questions) , you will notice that the response was listed as being on japanese and euro nx's. Since my vehicle is a UDSM, it would indicate either an imported part, or a imported car to which I needed further clarification. So next time you tell me to 'be quite'...again...quite!?! What the f*ck is that sh*t!?! - make sure you read the whole thread before trying to call me with your bullsh*t.

*edit* Further reading to your response, you clearly did not get the point on the english motherf*cker, because you capitalized Azz and not the initial letter on the start of the sentence. F*ck you are dense.
2009-09-17 18:57:58
#23
Originally Posted by bluey
I should change the topic to Learning English 101 from Dick Heads

As long as you learn to communicate effectively and how to SEARCH, you can call this Douchefest of a redundant Moronic Thread any damn thing you like.

Originally Posted by canx2k
refering to my question, which you laughably took the time to F*CKING SEARCH FOR (as opposed to using it before posting your rediculous questions)

Agreed. Blooey could have actually done a SEARCH in the first place and avoided this entire scenario.

He was too f*cking lazy, immature, ignorant, pig-headed and stupid to do so.
2009-09-17 18:58:58
#24
Actually i was the first to post so i thought i be nice and just answer him with his own answer but yeah like kevin said it's gonna hurt. I guess Kevin know me well enough with my response to the op, haha.
2009-09-17 19:00:14
#25
i asked for advice not respect. I want help so i ask the questions i think will help me to make the best decision possible. Why is my thread being hijacked by people that do the same as me.
i just want info or nothing
2009-09-17 19:03:45
#26
Originally Posted by bluey
I asked for advice, not respect. I want help so I ask the questions which I think will help make the best decision possible. Why is my thread being hijacked by people that do the same as me?
I just want information or nothing.


Fixed that for ya. If you want info, there is 2 years of information located beside the 'new posts' section of the top bar on EVERY window. If you choose to use it, you will benefit greatly. Should you choose not, and post that which was posted 1000000000 times already, do not cry to us when you 'dont get the info' you want.
2009-09-17 19:09:41
#27
Is "Ya" a word. Man get off My azz. You got the attention now SHUT UP
2009-09-17 19:14:36
#28
Careful 'azzhole', you may very well get the banstick!


Go cry to someone else, because I'm not here to get attention, I'm here to help people with REAL questions, not the same pablem I've been dealing with while speaking to you.

F*cking crybaby. Grow up, post legitimate questions after searching that haven't been answered, and start acting like a person who is old enough to deserve their photo on a licence and not a raving lunatic who seemingly lacks the ability to admit when he needs correction, man up and move on.
2009-09-17 19:18:47
#29
Originally Posted by Bluey
i asked for advice not respect.

Bummer for you.

You got advice, SEARCH.

However, you have given and received ZERO respect.

Originally Posted by bluey
I want help so i ask the questions.

You may indeed want help, but your approach is soooo f*cking wrong that it is aggravating.

Originally Posted by bluey
i think will help me to make the best decision possible.

You "think"?!?

How about "thinking" about using some form of semi-literate English?

How about "thinking" about where the SEARCH Button is located?

How about "thinking" about the fact that you are pissing off the people that could answer your (moronic, stupid, jackass) questions in the future?

How about "thinking" about actually putting in some effort on your own behalf to educate yourself before starting a redundant and UNreSEARCHed thread?

Originally Posted by Bluey
Why is my thread being hijacked .

"Highjacking" this thread, is like hijacking an airplane that is missing two of four engines, the remaining two engines are on fire, it has half a wing blown off, no working electronics, a dead Captain, the Co-Pilot is both deafened and blinded, and the airplane is already heading straight down into the middle of the ocean, during a Category 5 hurricane.

Originally Posted by bluey
by people that do the same as me

Your invalid point about canx2k has already been shot down.

Originally Posted by bluey
i just want info for nothing

I fixed that for you.
2009-09-17 19:30:16
#30
Originally Posted by Shawn


How about "thinking" about the fact that you are pissing off the people that could answer your (moronic, stupid, jackass) questions in the future?



Ha ha, Shawn, you and I both know that if the question is something I am capable to answer for him, I'm the first guy to do it (that's how boring my job is!). I guess that comes with the territory of getting to know the main contributors of a forum previous to opening one's obscenely large mouth.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top