Thread: people w/ ASP BUDGET Header

where does your vvl turn on?

if you sitll have it on the same spot as previous header you might wanna play with it... try 4900 i have gone now from 47 to 48 to 52 then down to 51 an 49 is best bet.. feels nice an pulls trains. if you do this please throw your feed back whether good or not.

With N1's try activating higher, like 5500-5700.

N1's with asp, ill try turning it down to 49k. I am at 5.5k right now, car feels great. But I will report back.

Dudeman

5.5k

both at 4.9k here, I would want to try them at 4.8k and the othe one at 5.3k

5100 here - ASP with N1's, cams at +5/-5. I was at 5300 when I had an SSAC. I have since upgraded the exhaust from 2.5" to 3". I need to get back on the dyno for more tuning, but work is keeping me very busy.

5300IN/5800EX w/n1's@+5/-6. i recall Charles stating to me that he's seen better results (a smoothing of the mid range) with an (odd) number of hundreds (rpms) between in/ex for some unexplained reason. thus i have (5) hundred between switch points.
these points were "dyno proven" for my setup.

im at 5200 with N1's

Fuk +5,-5. Straight up baby.

Are you on N1 cams or stock VE??
I am still on stock cams,but switching both at 4600