Thread: VE Build teaser pic

ok, so this is just a stock dimension 2.0 until you go 90mm.

looks good, excited to see the charts.

I can't wait to see your results and I thank you for not keeping them to yourself. I just hope we don't have a bunch of naysayers that cause you to regret that decision.

I'm curious, did you get rid of the reverse taper on the N1 runners?

Im sure there will be, there is always a few.

not track #'s haha the highway man

^Hopefully we can start to weed these people out of the thread quickly so it won't go to shhhhh. Keep it up Jamie .

Yes, it's just a 2.0.
Unported head
N1's/BC s&r's
16v (non N1) pistons
4-2-1 stepped header



Getting rid of the reverse taper was the first thing I went after. The only issue now is spacing between runners 2-3 after porting. I have to modify 2 velocity stacks to get them to work. I will take some pics to show the spacing problem.

Ok, I was wondering if there was even enough material at the top of the N1 runners to get a good forward taper on them or if there was only enough to make the runners straight.

So you are going to have to grind one side of both stacks and mate them closer to each other to line them up?

Jamie

I am headed down your way this weekend I am not sure if your around but I would love to check out some of the big things your doing and ask you some questions.

Unfortunately yes. I am trying to minimize how much material i take off from each side. It is the only option I have at this moment using the N1 runners.



Come down.

I will be around most of the weekend getting some stuff done.

I will be there also I want a ride thanks