Thread: VVL Intake Spacer

what injectors must I use with custom steel fuel rail and the sr20ve intake manifold?

I worry about the intake manifold injector end. does it have to be inserted in the manifold?

All I did was open up the hole in the manifold enough for the injector to go all the way down, made my own rail and brackets and got a thermo spacer kit from Outlaw. I have done two more since then and it works like a charm. U have like 1/16" clearance between the rail and the idle control tube.

damn wish i didint sell

Are you using the 1.6L HP A/C line? If so, B13 or B14?

1992 1.6 b13. It takes a little tweaking but it works.

what are the injectors? msd 2015?

I thought that I will have to open up the hole in the intake manifold. it is small for the msd 2015 injector ends. what size of the hole have you made?

I have precision injectors. I never delt with the MSD injectors so i'm not sure about them. I'm not using the custom steel rail, I made my own.

I'm afraid to use the top. My prime goal is to prevent leaks.
Don't have the oportunity to try each one.

I have compared the sizes of the msd 2015 and the sr20ve intake manifold with the CS fuel rail. the nozzle end of the injector is bigger than the hole.