piston clearances
i have read a lot of different info regarding piston clearances with de pistons and ve head.
anyway i am thinking of running sr16ve cams on my build but currently have cp 8.5:1 dished det pistons in there (so will end up with around 9.3:1ish). will i have any probs with clearance issues? i dont really want to be bending valves
the other one i want to ask about is sr16ve pistons with the 2l crank, can these be run untouched on a engine without oil squirters, or do the valve reliefs have to be cut? I obviously want high comp 13.5:1. I will most likely run 16ve cams as well, but hypothetically could i run n1's?
anyway i am thinking of running sr16ve cams on my build but currently have cp 8.5:1 dished det pistons in there (so will end up with around 9.3:1ish). will i have any probs with clearance issues? i dont really want to be bending valves
the other one i want to ask about is sr16ve pistons with the 2l crank, can these be run untouched on a engine without oil squirters, or do the valve reliefs have to be cut? I obviously want high comp 13.5:1. I will most likely run 16ve cams as well, but hypothetically could i run n1's?