Thread: Cams 20v/N1 ready!

can someone please degree them before or after dynoing?

OMFG you guys are nothing more than a ****tease.

and a buncha drunks from the looks of it.

Just setting the record straight about Franklin Cams - SR20 Forum

Educate yourself... You might understand who and why has forced this community still looking for cams

I stepped up in this thread and said dont sent them to me.

You want to bring up and old arguement that has been beaten to death atleast 4 or 5 times. At some point you guys just need to let the past go and move on.

The FS4 cams have been tested by BlueRB240 over a year ago, Evlnxr tested them about 9 months ago and a few other people from down under and in New Zeland have tested them. So if the FS4 cams dominated when they were tested by these guys above why am I the sole reason why there are no cams on the market. There has been tons of info on these cams.

I dont make cams, I dont import cams to be sold, I have no cams for the VE to sell so why would I stop the market of a great cam.

If the FS4 cam did so great and made huge HP on the dyno over the N1s, I could have said they sucked a million times until I was blue in the face and they would have still sold because the proof of the HP the FS4s made over the N1s would have been 100% conclusive with hard facts from dyno sheets by all the guys who have dynoed them.

Guys lets move on and not mess up another thread on old news.

^^^ agreed

lets just leave that one alone, everything on the matter has been said, there is no more to say.

???????????????????

I am very intersted in what you have?

Please pm me and lmk the details.

thanks
john

really? this is news to me. very exciting, last i heard when you were playing with N1 cams they were pretty much just to hard to improve upon. do you have any of these cams available... and how much. im very interested. pm me

Quote:
Originally Posted by jonwepa
I am very intersted in what you have?

Please pm me and lmk the details.

thanks
john

Quote:
Originally Posted by snickers
I have nothing to do with these cams so dont ask. I have lobe profiles that make more power than 20v/N1's that will drop in and work with stock springs and not need cam gears. these will make about 5whp more everywhere from 4000-8000rpm over any 20v N1 cam drop in.

If they want to make these and everyone wants to buy them, then by all means go for it. That just means I dont have to make any cams then because even if mine would be better no one would buy em.





I believe the cams that he's been planning to make is on this thread http://www.sr20-forum.com/vvl/14189-checking-interest-getting-20v-n1-cams-made.html.

He was just waiting on the 20v cams to come in from japan which they have. He has a lot of projects going on right now so I don't expect the cams to be done anytime soon, but they will be worth the wait.