Thread: Cams 20v/N1 ready!

I have nothing to do with these cams so dont ask. I have lobe profiles that make more power than 20v/N1's that will drop in and work with stock springs and not need cam gears. these will make about 5whp more everywhere from 4000-8000rpm over any 20v N1 cam drop in.

If they want to make these and everyone wants to buy them, then by all means go for it. That just means I dont have to make any cams then because even if mine would be better no one would buy em.

I recognize the cam core, definately not ground in the US.

ah k cool. They must be the other 20v/n1's

i was atually going to ask if for your profile are the n1 high's going to be slightly modified as i think they could be improved upon, the 20v lows would be hard to beat though.

so what is the lift of your profile? would be cool to see what you could come up with without the stock valve springs restriction, but due to ease of drop in designing for stock spring drop in would be best for sales.

Dude dont give up on us...I will buy yours and I am sure others will.Thats why I have held off on buying N1s...waiting for your hybrid.
After putting your header on my car,I am a big fan of your work with the VE.Even on my stock cams the motor really hauls now.Pulls real hard and it sounds wicked,too!
I would much rather have a set of drop in cams.If I am gonna spend the $,I want the best available at the time(within reason,of course)
I wish I was out by you,I would donate my car for all the testing you want.I can find a tuner anywhere near me within 4 hours that I know I can trust to dynotune my VE.

It looks to me like someone saw all the interest and tried to beat you to it.
And whats up with the lack of info?? no info or anything just a teaser pic....LAME!!!
That alone makes me not want them.Seems shady to me.
I know when yours are ready,you will post them up with a dynosheet to show who's the man!

If these arent made here in the US that would be good for the guys overseas,and we will just get ours here in the states.Saves on shipping at least.

I'm still gonna wait for Charles emmaculate cams.

^Charles, come on bro. You know we are in for your cams. Put me at the top of the list. I don't even have a VE motor yet and I will buy them. That says something don't it? H*ll I even have your header (pending) to support your work.



^x2

[/B]




[QUOTE=MR-4Door-SR20DET;235902^Charles, come on bro. You know we are in for your cams. Put me at the top of the list. I don't even have a VE motor yet and I will buy them. That says something don't it? H*ll I even have your header (pending) to support your work. Lets get this cam you have to eat the 20v/N1 cam up!



^x2[/QUOTE]

There you have it Charles
snickers.....4
bill...........0

no offense but its only 4 buyers and most talk until the bill shows up.

I would love to see a run of these cams but you need to round up about 40-50 dedicated buyers who WILL drop a deposit.

Do we really need 40-5- sets to get them done? wow that is alot
Well this post has only been up for 4 hours.Thats one per hour so far.

I feel you on the people not paying when it comes due.You are right there.
I believe most or all 4 of us have stepped up on the header without problem.
It seems to me if the cams were 600 bucks a set,they would be a value considering what it costs for n1 and cam gears,and possibly springs and retainers.I would bet that everyone who has stoch VE cams and bought a ASP header will buy the cams.If not they would be foolish,IMO.I would guess that half the guys running N1 cams already that bought the asp header will step up too.

I dont want to debate that I was just saying that I will wait until I hear from Charles that he is NOT doing cams before I would ever consider buying these.

it was a joke.....