Thread: ASP Budget Headers on B13/N14 Chassis

^^Stock sway bar guys? or Progress etc..?

stock one on mines....i'll be getting that fixed asap. It was also hitting the crossmember but we heated it up really good then pounded that bar in just enough to clear. But that vibration sucks big time.

It's even worse when I put the car in reverse. I had a chicka in my car and she was like, what the h*ll is that. Then I have to explain why it sounds like I'm running over a few dead bodies O_o.

http://www.sr20-forum.com/offtopic/22801-dash-english-lesson.html

C'mon Reese, just do it! Fix that ish.

^I'm working on it bruh lol. I know I sent you a PM on this back in May haha. 2 jobs and football has had my weekends tighted up. I just been driving my car back and forward to work lately. This weekend I'm off, so hopefully it will get taken care of.

^The problem of the vibration.



^This area looked good and I didn't see any rubbing marks anywhere.



^Hammer time!



^Quick touch up paint job.



^Installed and not touching. I noticed a big difference right away.

^ good lad lol
dd

I had the brace chopped and welded, plenty of clearance now, I couldnt physically bolt the brace back up as it was pressing against the manifold.

I do have pictures which I will upload shortly.

The top of the down pipe touches right in the centre of the ARB, I have put an exhaust rubber between the two bits for now, which has stopped the vibration, I will get round to modifying the downpipe at some point Ive just spent enough time faffing with it for now....

Mr 4dr...is that rust on your ASP
Here are some pics of mine on back when it was first installed on my nx.
My fitment issues were different,even though we have the exact same header
Mine fit fine by the crossmember,no rattles...it was real close,though.
The lip on the bracket did need a minor trim by the flange to clear the rear mount.