Thread: Post your VE engine bays

She's a hot mess right now. I am trying to do a mini wire/hoses tuck.

Still in progress but getting there.

@s14det How did you clean up that wad of wires and what not around the driver side firewall?

Most of those are power for the rest of the car. This can be relocated to the interior of the car. Then the wiring for lights and other things in the bay run down each individual side and hide in the fenders. You can also run some of the wires with the engine harness.

I guess I should be looking at the car to comprehend what you mean by putting the wires into the interior of the car. Would this involve cutting wires and re-splicing them back together?

For most of the wires you just pull them back through the grommet that goes through the firewall and re-route them inside the car. Some go to the SMJ and others to various parts of the car. I made a new fuse box and relay spot behind my glove box. Then the wires run to where they need to go from there. I had to lengthen some wires and shorten others. Its a tedious task but to me is well worth the work.

Check my build thread, there is some info in there on what i did with the harnesses.

b13 4dr

It's about time I get off my lazy ass and post mine but I've been too busy driving and enjoying my first ever VE powered car lol bye bye DET's what was I thinking I should have been gone VE I cant wait to turbo this car boost withdrawals FTL :'(