Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Post your VE engine bays

+ Reply To Thread
Posts: 531-540 of 695
2012-09-06 22:36:50
#531
Originally Posted by Doctor
Originally Posted by naedtrax
Did a little clean up and a small wire tuck, nowhere near done but yeah you get the idea.



Very nice.

What throttle cable bracket are you using?


Thanks for the kind words guys

I managed to brace the accelerator cable in a way i don't need a bracket , wouldn't be possible on left hand drives tho because of the cable routing i don't think. I have thoroughly tested it and i have a brace on the strut tower(cable holder) and braced to the IACV as well, does not move at all and looks a whole lot cleaner.
Last edited by naedtrax on 2012-09-06 at 22-37-03.
2012-09-12 09:58:02
#532
Currently using a GA16DE Throttle cable and used the sparkplug wire bracket as a holder for the cable, routed into the VE Plastic Throttle cable guide

2012-09-12 14:19:35
#533
2012-09-12 16:37:47
#534
Originally Posted by 200sx


Your missing something, and try changing your plugs, it will run better.
2012-09-12 16:52:37
#535
Originally Posted by squirlz
Originally Posted by 200sx


Your missing something, and try changing your plugs, it will run better.


Yea, I'm missing my oil dipstick
2012-09-13 00:40:19
#536
Originally Posted by 200sx


your VC is leaking too... and your oil filter is on upside down... I gotta dipstick fs if you need it... $350 shipped
Last edited by det-ser92 on 2012-09-13 at 00-42-11.
2012-09-13 07:57:12
#537
Originally Posted by sunny
Currently using a GA16DE Throttle cable and used the sparkplug wire bracket as a holder for the cable, routed into the VE Plastic Throttle cable guide



what headers are you using?
2012-09-15 06:41:37
#538
Originally Posted by b12sr20ve
Originally Posted by sunny
Currently using a GA16DE Throttle cable and used the sparkplug wire bracket as a holder for the cable, routed into the VE Plastic Throttle cable guide



what headers are you using?


These are JCRacing Headers, made by MagicPower (China Made) 2.5 inch final outlet pipe, primary diameters are bigger than the VE exhaust ports, everything lined up properly, studs and gasket.

Jovan i think still has 1 in stock, we ordered 2 for myself and Bertoo1960

Tevs
2012-09-15 12:02:43
#539
Looks good bud!
2012-09-25 23:54:14
#540
mods: N1 cams,jwt camgears +5/-5,fujitsubo header,ARC intake box system,N60 maf,2.5 mandrel bent catback,5zigen muffler,koyo rad, nismotronic nemu RT ecu, nismo radiator cap, nismo thermostat


+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top