Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Post your VE engine bays

+ Reply To Thread
Posts: 491-500 of 695
2012-08-13 01:14:06
#491
Originally Posted by SER96VSPEC
Originally Posted by datsun_sky
I envy those engine bays...

I just want to know, where will i place my ignition coil if im going to use the external ones?


Are you going to use the stock coil? FWD? If so, you can unbolt the coil from the stock mounting braket then bolt it to the block using one of the bolts that bolts on the solenoids to the block. I used one of the bottom ones on my buddy's B13. You can see that's what a few people did on here.


yes FWD for B13. can you take a pic bud? I noticed that the place where the stock ignition is the place where the solenoids for the VVL. so i am now thinking where will i place the stock ignition coil.
2012-08-14 00:14:39
#492
filthy as shit. Got tons of cleaning up to do. Making sure everything is 100% then I will carefully run hoses and wires to clean it up. Shes running good!

2012-08-14 01:00:51
#493
Holy intake pipe Batman lol.. MOAR PICS!
2012-08-14 01:24:13
#494
there you go bes!!!
2012-08-14 01:30:01
#495
Originally Posted by '>
Teal200sx;823381']Holy intake pipe Batman lol.. MOAR PICS!


Just stock ve with a big intake that's all.
Last edited by Manny on 2012-08-14 at 01-30-32.
2012-08-14 01:44:49
#496
Thanks boys. I'll get one of the local guys to do a shoot of the car once its done. The bay will look a lot better. The bay will look a lot better with lines tucked away. The intake pipe is a just a baby 4" lol. Will need a trip to Mark in CT to chico shine the bay lol
2012-08-14 07:11:02
#497
Originally Posted by datsun_sky
yes FWD for B13. can you take a pic bud? I noticed that the place where the stock ignition is the place where the solenoids for the VVL. so i am now thinking where will i place the stock ignition coil.


The car's been gone for a little over a week now. I didn't get a chance to take a pic. But I bolted it to the end of the solenoid block that bolted to the motor. You can unbolt the coil from it's iron mounting block. It has a couple spots where the bolts pass through it so you can use those holes to bolt it to the solenoid block. If you flip through the pages of this thread you'll be able to see a couple of B13's that have it mounted this way. If not, you'll have to source a longer coil wire and just mount it remotely along the frame rail. But again, it's easier to mount the coil if you separate it from its stock mounting block.
2012-08-14 07:16:19
#498
Originally Posted by Manny
Originally Posted by '>
Teal200sx;823381']Holy intake pipe Batman lol.. MOAR PICS!


Just stock ve with a big intake that's all.



just a stock De with an oversized intake LOL...surprise!
2012-08-14 10:41:16
#499
someone should fall for it lol
2012-08-18 02:56:25
#500
Originally Posted by datsun_sky
I envy those engine bays...

I just want to know, where will i place my ignition coil if im going to use the external ones?


+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top