we cut the last couple inches off the stock lower runner section (with flange). then cast new runners to add length to mate to the plenum. the reverse taper of the stock lower section was opened up a bit before the 2 pieces were welded together.
it's sort of a frankenstein that i fabbed up from the lowport and some standoffs (spacers). i'll take a closer up pic for you. after you see the pics lmk if you want it.
Originally Posted by blusteelsr20 ^^^^ Tell it VE bro!!! Kyle speaks truth when it comes to the 20V cover. Both of us were fortunate to get these new with the spark plug cover. Seems that the cover is one of the most elusive parts to find, with some members waiting close to a year and still have not received it.
just notice on this photo. you have the cruise control cable where normally the throttle cable hooks on to. Have you had any problems with this been switched around?
0 Likes
Be the first to like this post.
97" 200sx SE- VE swapped, jgy 11lbs flywheel, act clutch, ssac header, vrs 3" exhaust, Tein SS coilovers. custom 3" intake(first car I ever had)sold 3/3/14" 9/7/11"- purchased my 2nd Nissan- 97" Nissan 200SX SE-R Autumn Sunburst sold 5/1/14" 4/29/14"- 01" Infiniti G20 whitesold 3/2/15" 12/23/14"- 97' 200SX SE-R white sold 1/24/15"12/27/14" 2002 Infiniti G20 Sport Silver sold 5/31/15"4/26/15 92" Sentra SE-R White sold 2/21/16"
Originally Posted by bj200sx just notice on this photo. you have the cruise control cable where normally the throttle cable hooks on to. Have you had any problems with this been switched around?
Actually it looks like he is running both cables wise
I have the accelerator cable to the further side of the throttle body, that's wrong right?