Thread: Post your VE engine bays

okay I know may be stupid question but again how much does one of these valve covers go for and do they just bolt up to the sr20ve motor?

You can get one from Greg V or used from partouts for about $260 or less. And yes they bolt up to the VE head no problem.

mae en curri.

There are two things you need to look out for when getting a 20V vc.

First: You need to get the RWD DET spark plug well gasket (that's the gasket for the center of the VC, that's the one they decided to use on the 20V vc).
Second: The spark plug wires fit a bit weird (because it was designed for coil over plug). You will probably have to trim some of the rubber up at the top sealing area so that the plug wires fit well. (sorry if this is slightly off topic).

I'm very happy I got mine, I love the way it looks.

^^^^ Tell it VE bro!!! Kyle speaks truth when it comes to the 20V cover. Both of us were fortunate to get these new with the spark plug cover. Seems that the cover is one of the most elusive parts to find, with some members waiting close to a year and still have not received it.

Yo en Pozos, Santa Ana. Tenemos que hacer un ´mini-meet´pronto ....

My 16ve Engine Bay

very clean chap

So what's up with the throttle cable bracket? I'm seeing where some guys can use the stock VE bracket, and some have to move it forward. I tried using the one of the stock VE in the stock location and it has my car revving at crank up no matter how I adjust it. I guess I'll have to move it forward a bit.

works great and has since been painted gloss black. 5 1/4" long