![](/images/bbcode/quote_icon.png)
Originally Posted by
AndreasOn a scale of 1-10 how does it fit in your opinion and was there alot of work to be done to get it to line up.
I'd say it fits like an 8, 10 being OEM.
I would line it up and drill slight horizontal slots for the bolts. That way you can bolt it up loosely then "message" the contour from the middle to the outside.
Then the part the bolts to the wheel well will require like 1/8" collar or something.
Depending on how much time you take, you can get it to fit almost flush everywhere.
If you just do it once without "working it" you might end up with 1/8" gaps on the corners.