Thread: Poll on which injectors to use until i get my calum ecu

so gonna use the de ecu, maf i have read some people say to use the ve's some say to use the de's .. lets figure this out, i dont know how long its going to take to get my ecu, an i dont drive very much, but if i have to go some where i wanna run the best setup..

Do you do any research? This is a real basic question. Just decide how much power you want, then get the injectors that best match your intended output. There is a thread that shows how much power a certain size injector can support, same with the MAF's

yea i do alot of research thats why i dont post very often,

i will only be using the stock ecu until i get my calum ecu for mostley small trips and such power is not a concern, running to rich or lean is a concern

i appriciate you tryin to steer me in the right direction, thanks!

is this the thread your talking about?
http://www.sr20-forum.com/general-maintenance/166-inj-size-whp-output.html
it doesnt really answer my specific question, thats more for people looking to add power, an have ecu's to tune to use the bigger injectors an such...

please read peoples questions more carefully before posting

What modifications do you have for your car? That would be a good start.

You use de injectors with de ecu and maf... This isn't really a question on NA motor. Trying to use the VE injectors will make it run rich. Just don't go racing around like that since you are likely to max out the injectors.

This is your answer.

sounds good, i have jus read so much crap on people sayin to use the ve injectors an some say de.. but no one really like confirms anything or whatever.. hopefully this thread will help out others thanks guys