Thread: SR16+n1 cams

what kind of power increase would dropping N1 cams into an SR16VE give if any? just wondering i dont want to go to 2.0 want to stay 1.6 but make more power.. any sugestions

Keep the cams at 0,0 to start, but those and a good header can make some great power on a 1.6. I've seen 186-190whp with sr16ve's setup right with N1 cams and a good header.

seriously 180+WHP what internals? intake and ECU? i take it you would be able to supply said header?

Well the N1 is a supposed 170-175whp? So decent headwork, N1 cams and a **** hot exhaust system your onto a winner.

i know but i dont have the N! pistons or intake manifold.. just a basic 16 i relaly just wonderd if the N1 cams would give a bit more power as a drop in cam..

itbh i would say 10hp as a drop in cam. Your probabally better off buying snickers 4-2-1 header first and would prob give better gains than just bolting in n1's. Plus its cheaper. I would probably go custom intake manifold next and if you still want more power go the n1 cams. But hey thats just me and thats the order i would do it, as the sr16ve cams are a decent unit.

I would not rush out and do the N1 intake manifold setup first. I would do the N1 cams, and my 4-2-1 header first.

Anyone got any dyno figures from stock 16ve?

Here:

Project 16/20 VZRaggy

Think the sr16ve tuned with greddy but made about 5 extra whp.

Peace

Thank you Raggy.
So how is it possible to gain 40+whp with just N1 cams and a decent header, whatever magic tuning can involve also?