Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Budget Build

+ Reply To Thread
Posts: 41-50 of 386
2009-02-22 18:12:47
#41
Jun, shoot me a pm if you haven't gone to the dyno with this build yet I'd like to go check it out. Its dave.
2009-02-23 03:35:15
#42
Well guys we made it over to the Dyno today. The car made 231whp I'm going start off by going over the mod list on this car,

sr20ve
N1 Intake manifold
N1 Retainers
N1 Cams
N1 Tensioner
BC Springs
Tomei gears
VET Head gasket
CP 12.5.1 87mm
Eagle Rods
sr16ve trans
Pulleys, Flywheel
Kesi24 Header
GReddy Cat Back
PR CAI

We did not get a chance to touch the cam gears! We didn't have enough time. Also the car was on pump gas! The owner is going to be buying an AEM within a month & then we'll tune the car over. So when that time comes we'll tune the gears. The motor now has 285 miles on it! The car will be at the track in a week, so stay tuned for some ET's.

I'd like to thank a few people that was involved with this budget build,
Greg V for most of the OEM Nissan Parts,
John From XX-Tuning for the Dyno
Kesi24 for building an Awesome header
The owner of the car, Jamal for bringing his car to Tarmac Motorsport & leaving with a smile
& Last but not least, Miller Light for making the motor assembly all possible!



jun
2009-02-23 03:44:24
#43
Damn nice. Good work.
2009-02-23 03:45:48
#44
WOW!! good jobb jun
2009-02-23 03:47:45
#45
Originally Posted by URBANRACERONE



& Last but not least, Miller Light for making the motor assembly all possible!



jun


LoL
2009-02-23 03:49:35
#46
Originally Posted by URBANRACERONE
Well guys we made it over to the Dyno today. The car made 231whp I'm going start off by going over the mod list on this car,

sr20ve
N1 Intake manifold
N1 Retainers
N1 Cams
N1 Tensioner
BC Springs
Tomei gears
VET Head gasket
CP 12.5.1 87mm
Eagle Rods
sr16ve trans
Pulleys, Flywheel
Kesi24 Header
GReddy Cat Back
PR CAI

We did not get a chance to touch the cam gears! We didn't have enough time. Also the car was on pump gas! The owner is going to be buying an AEM within a month & then we'll tune the car over. So when that time comes we'll tune the gears. The motor now has 285 miles on it! The car will be at the track in a week, so stay tuned for some ET's.

I'd like to thank a few people that was involved with this budget build,
Greg V for most of the OEM Nissan Parts,
John From XX-Tuning for the Dyno

Yes!! I did have my hands in it LOL!!!
Originally Posted by URBANRACERONE


Kesi24 for building an Awesome header
Everyone at Tarmac Motorsport that had their input
& Last but not least, Miller Light for making the motor assembly all possible!



jun



The car made many consecutive 228, 229, 230 runs. Looks like we have to play with cam gears and maybe play with some more low end runs. Id like to make the car pull harder through the mid range. Flaten out some of that torque curve. Need some more time with the ecu
2009-02-23 03:51:51
#47
Nice #'s.
Last edited by MR-4Door-SR20DET on 2011-10-25 at 13-53-43.
2009-02-23 03:52:21
#48
Originally Posted by supercowboy
Yes I did have my hands in it



The car made many consecutive 228, 229, 230 runs. Looks like we have to play with cam gears and maybe play with some more low end runs. Id like to make the car pull harder through the mid range. Flaten out some of that torque curve. Need some more time with the ecu


Ok Jay Hass

jun
2009-02-23 03:55:47
#49
Its time to break out some more of those millers. You know thats a redneck bear
2009-02-23 03:59:15
#50
nice
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top