Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Budget Build

+ Reply To Thread
Posts: 1-10 of 386
2009-02-15 02:06:29
#1
Budget Build
Here are some pic's of a customer's VE. I finished the rest today, The motor will be in the car by Monday & hoping to hit the dyno within a week.

sr20ve
N1 Intake manifold
N1 Retainers
N1 Cams
N1 Tensioner
BC Springs
Tomei gears
VET Head gasket
CP 12.5.1's
Eagle Rods
sr16ve trans
Pulleys, Flywheel
Kesi24 Header
Calum Realtime





jun
2009-02-15 02:19:15
#2
what car is this going Into.... I also can't wait for the dyno numbers
2009-02-15 02:23:30
#3
12.5 cr whew! N1 cams????
2009-02-15 07:41:50
#4
interested to see what a difference the compression makes...
are they off the shelf pistons?
2009-02-15 08:37:38
#5
Mazworx got cp to make 12.5:1 shelf pistons, well atleast I assume they are now shelf pistons as they are listed in cp's catalog

Hey Jun, you would happen to know how much lighter these cp pistons are than sr16 pistons?
2009-02-15 11:06:43
#6
out of interest, do the off the shelf pistons have enough of a cut out to run the n1's and play with cam timing?
2009-02-15 15:03:24
#7
Originally Posted by lonewolf
out of interest, do the off the shelf pistons have enough of a cut out to run the n1's and play with cam timing?


Yes that's off the shelf cp /mazworx pistons.Look at the pictures its deep enough for alot of cam timing and you can run +2 oversize valves !.
2009-02-15 15:24:10
#8
these pistons are 86 or larger?,
2009-02-15 15:28:03
#9
Originally Posted by anomaly
these pistons are 86 or larger?,


87mm, As for the valve relief were going to try up to -3/+3 on the dyno.

jun
2009-02-15 15:41:50
#10
whats the budget?
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top