Thread: MSS alarm help

I hooked up my Greddy MSS to switch my cams.
When you turn it on,or start the car the alarm on the mss goes off immediately.
The display is showing 5.10 (V).
If I change the config from Vo-to Pr- like the how to says,I get 9.99 and the alarm.
Can anybody help me with this.It seems no matter what I set the alarm parameters to it is sounding right away.
The unit was working fine before I moved it to the new car

check ground or try to switch it to a diff acessory wire

ground is good...I used the cig lighter for the switched accessory wire.

this is a good question as mine does the samething..... have to press the knob everytime to stop the alarm from continuing

well I guess I am glad I am not alone
Maybe someone else has figured this out.

Funny thing is ,I was wanting the display to be red to match my cluster and interior lights,but not like this.

Everything else works fine,I got tach,and the cams are switching fine
Even if I could turn off the beep,I would be happy...otherwise I have to push the button everytime you start the car,or turn the key on.