Thread: SR20VE motor wont start

Just done put everything in and wired everything and I havent wired VVL onto MSD, yet. all of the electrical are working but no crank, no spin, no start. nothing, my dad heard a click every time he crank it. a click from one of the fuse box. Help?

Battery good? or turn the motor over by hand, make suer it is'nt locked up. then power to starter and ign. and...

Oooh this happened to me when the clutch relay wasn't engaged. (That clutch safety switch under the clutch pedal). Have a multimeter? Check the voltage at the battery while the car is off, then in ACC, then when he bumps the ign. Could be bad ground from starter, too.

everything is new, new battery. forgot to add details, the car is GA model, converted from GA auto to SR manual. a click from one of fuse relay somewhere. I hope it not the starter, it pain to replace it in the engine bay.

on the side of the ga model there is a plug that you have to plug in .for the starter to crank over

i had this happen to me its on the driver side i think the sr has one wire and the ga has 2 doble check that

let me c if i can find some pictures to what im talking about

yeah i need pics , I know there is a plug that i cant find to plug. hope it is the only plm. need it run loud and wake up my neighborhood heh

i know its one of the ones under the battery tary ima go snap a pic of mine in my car hold on haha

GA one looks like this
[img][IMG]http://i338.photobucket.com/albums/n435/thugsterx510x/100_2157.jpg[/img][/IMG]

sr one looks like this
[img][IMG]http://i338.photobucket.com/albums/n435/thugsterx510x/100_2161.jpg[/img][/IMG]

so what i did was go to the junk yard and i cut one from a ga and one fron an nx 2000 and solder it togeter like this

[img][IMG]http://i338.photobucket.com/albums/n435/thugsterx510x/100_2159.jpg[/img][/IMG]