Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Headers Question

+ Reply To Thread
Posts: 1-5 of 5
2009-02-12 21:24:49
#1
Headers Question
Im plan to get a ve but wanted to know if i can use my de headers on it?
thanks for the help
2009-02-12 23:01:37
#2
Your de has two header(s)!! That's sick is it a v6 or v8 de?


You can use the de header on the ve, but you will be choking it ALLOT. You could try porting the header with a dremel or similar rotary tool, should help out somewhat.

The ve is especially sensitive to exhaust design. Try and invest in the best you can afford you wont be disappointed.


Best of luck.


Dudeman
2009-02-13 11:34:12
#3
I recommend that you try to use the search function to get your answers first or folks here will tire of of your questions very quickly. This particular question has been discussed many times between this forum and the old one.

Enjoy the ride.

Bill
2009-02-13 17:16:23
#4
Originally Posted by prtitan06
Im plan to get a ve but wanted to know if i can use my de headers on it?
thanks for the help



No.Well yes it can be used but not optimal. De ports are smaller than ve.

Use the ve header or get an aftermarket like the SSAC. Some are ported to match the VE.

Peace
2009-02-13 22:05:00
#5
DE ports are the same size as VE ports on the exhaust side of the cylinder head. They are positioned lower on the head than the VE ports by at least 1/8th inch. The DE header is a temporary fix until you find a true VE header or the SSAC 2.5" as a cheap VE alternative with stock cams.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top