Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: SR20VE 4-2-1 "budget" header

+ Reply To Thread
Posts: 271-280 of 1,123
2009-01-18 23:06:33
#271
^^^ ok what about on the stock cams,still gains everywhere?
It will be a while before I do the N!/cam gears setup.
Thanks again.Seems like a no brainer on the merge but how about the other question...

" If you do not get the springs and tabs you will have a single welded primary ,and if you get the slipfit and springs/tabs it is 2 pieces?
The only advantage to this is ease of install,right.It seems like it would be less prone to leaks with one less connection"
2009-01-18 23:33:58
#272
I'm about to get some other parts. I'm gonna have to wait. If the price goes up to $500 + $150 after the group like blueRB240 said, that is still not a bad deal. If I wanted it to have a cermaic coat, it would be $650 + $150?


Originally Posted by BlueRB240
Yes but it won't be this cheap. After the group buy I think he said it's $500 for the normal + 150 for the collector. It might be a few pages back but reread.


^So were saving $100 on the group buy minus the add on options?
2009-01-19 03:12:34
#273
Originally Posted by MR-4Door-SR20DE
I'm about to get some other parts. I'm gonna have to wait. If the price goes up to $500 + $150 after the group like blueRB240 said, that is still not a bad deal. If I wanted it to have a cermaic coat, it would be $650 + $150?

^So were saving $100 on the group buy minus the add on options?


Originally Posted by snickers
Normal "Retail" price is $495 for the base header

Retail for full merge, V band, second O2 sensor is $690

There is always ceramic coating available as option to everyone for $155 as well.


yeah sounds about right.
2009-01-19 04:34:15
#274
Originally Posted by eggman
^^^ ok what about on the stock cams,still gains everywhere?
It will be a while before I do the N!/cam gears setup.
Thanks again.Seems like a no brainer on the merge but how about the other question...

" If you do not get the springs and tabs you will have a single welded primary ,and if you get the slipfit and springs/tabs it is 2 pieces?
The only advantage to this is ease of install,right.It seems like it would be less prone to leaks with one less connection"


there will still b big gains with stock cams. The Slip fit is more just for ease of installation. But yes, less prone to leaks with one connection. I do plan just to weld the merge collectors on.
2009-01-19 04:40:42
#275
Originally Posted by MR-4Door-SR20DE
I'm about to get some other parts. I'm gonna have to wait. If the price goes up to $500 + $150 after the group like blueRB240 said, that is still not a bad deal. If I wanted it to have a cermaic coat, it would be $650 + $150?




^So were saving $100 on the group buy minus the add on options?


The group buy basically saves $100. The base header + full merge collector is $650 normal retail cost. Ceramic coating $150. so $800 coated. I am going to build a few extra headers to stock on the shelf during this group buy. If I still have a few of those, then I am willing to discount it slightly from full retail untill they are all gone then they will be just normal price.
2009-01-19 05:08:23
#276
Haahhahhhaa, sorry but I have to laugh at all the doubters after seeing the dyno. Damm! There must be a whole lot of newbies on here that know snickers a whole lot less than this newbie even. NOW are you all going to listen to him?
2009-01-19 10:30:09
#277
May have a set of these up for sale before I even get them, had a good offer on my car today...
Still happy to make good on my commitment to buy (having already paid), although someone in the states may get a bargain rather than me paying for shipping to Aus.
2009-01-19 14:50:00
#278
Originally Posted by snickers
The group buy basically saves $100. The base header + full merge collector is $650 normal retail cost. Ceramic coating $150. so $800 coated. I am going to build a few extra headers to stock on the shelf during this group buy. If I still have a few of those, then I am willing to discount it slightly from full retail untill they are all gone then they will be just normal price.


^Fair enough. I will be in touch.
2009-01-20 07:07:47
#279
OK I decide to go full merge,front o2,with standard 2 bolt flange.
PM and Payment sent!
Thanks Charles for the extra time to get my chit together
2009-01-20 15:27:21
#280
Originally Posted by eggman
OK I decide to go full merge,front o2,with standard 2 bolt flange.
PM and Payment sent!
Thanks Charles for the extra time to get my chit together


^Good stuff eggman. This is probably how my order will look, but I may choose to get with the cermaic coat when I'm ready.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top