Thread: installing n1 cams

Im running my N1s on a SR20VE bin and I got no problems.

And breaking in the cams?! Wth is that? lol

well, on brand new cams, you have to rev it up between 2k and 2.5k rpms for 20 minutes, and then under 4k rpms for about 150 miles...

do you have a wideband? If not, don't even bother asking questions until you do...however, if you do have a wideband, then I would suggest starting with the sr16ve cam program first and see where you are at, and then if the afr is still a bit low.. high 12's low 13's, then move up to pito bin and see where you are at. You may also want to try frankie bin. do a search for that as well.

Ok thanks. No I dont have a wideband. I just ordered my Moates Burn2, I will install the cams when I get it. So what bin would be safest to start out on since I dont have a wideband? sr16 cam bin still?

I have looked at widebands online but it seems to me that there are always missing pieces in the kits on top of that I Dont know all the pieces I would need to make a complete kit and all the parts are so expensive! So I did'nt bother getting a wideband. I just want to get the car on the dyno as soon as I break in the cams.