Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Thoughts on a full race motor setup

+ Reply To Thread
Posts: 131-140 of 333
2008-12-10 18:15:24
#131
Here's a link to my itb setup.

More VE ITB goodness - SR20 Forum
2008-12-10 18:35:36
#132
Originally Posted by Doctor
Here's a link to my itb setup.

More VE ITB goodness - SR20 Forum


So how much power you making? Whats the finished set up?
2008-12-10 21:58:11
#133
Mine should be love fab equal length, o2 induction intake and a VE head with either a GT3076r or GT3582R, and a sleeved block forged pistons, crower rods , AEM EMS , this is inless I change anything again ...I intend to get some head work done next winter and through the 90mm pistons in with the Cosworth gasket , is there anything you think I am over looking ???
2008-12-11 05:50:47
#134
I have not seen one of those O2 induction VE intake manifolds. Depending on how short the runners are, you may be better off with a stock intake manifold for your setup. You are better off with a doing port work on the cylinder head and using the stock intake manifold, than the shorter length manifold on a stock cylinder head.

If your goal is 500-550whp then you can use a GT30R but you must use the .82 housing. The turbo wont flow enough for more power than that. If you want more get a GT35R or atleast maybe a GT3082R ( 60mm turbine, 82mm comp wheel). Either way you should be running a .82 housing. If you get a GT35R you can get away with the .63 housing for low 500whp.

-Ted
2008-12-11 06:09:21
#135
anyone need any flanges?




-Ted
2008-12-11 06:47:38
#136
Originally Posted by Doctor
Here's a link to my itb setup.

More VE ITB goodness - SR20 Forum


That is a beautiful ITB setup!!!

Have you installed it and tried it yet? I only see one pic in that thread... was there supposed to be more than one? Do you have a pic with the plenum?
2008-12-11 06:57:05
#137
O2 induction VE intake manifold.
2008-12-11 12:38:08
#138
wow, what are they worth?
2008-12-11 14:10:01
#139
Originally Posted by lonewolf
wow, what are they worth?


^x 2...............Dang that is a very VERY nice piece.
2008-12-11 15:23:42
#140
Originally Posted by SERacer
So how much power you making? Whats the finished set up?



Setup was just finished. Busy braking in the motor now. Should have some dyno #'s late in January.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top