Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: VVL HOW TO: Configure Greddy MSS

+ Reply To Thread
Posts: 11-20 of 30
2008-06-07 19:56:49
#11
Originally Posted by blo0d
sry mang... dont kno how i missed that post


Not a problem. There is a lot of information to take in. This is a great community, and we are here mostly to help each other out.

Bill
2008-11-24 20:54:20
#12
Qucik ques
Do i need to map some sort of fueling mod to support the MSS? or will it just plug and lower?
thanks
2008-11-25 12:27:19
#13
Originally Posted by D_turbo
Qucik ques
Do i need to map some sort of fueling mod to support the MSS? or will it just plug and lower?
thanks


If I understand your question, the answer is no. All the MSS does is activate the solenoids at a certain RPM (which you can choose and change) and the solenoids cause the cams to switch from the low cams to the high cams.

Setting up your fuel map is a totally different thing.
2009-04-06 00:45:50
#14
Which selinoid it s which? Meaning on the car which selinoid is the exhaust and which is the inatke? Thats all i need to know.

ONES GREEN AND ONES ORANGE?

Can somebody help please? Is the inside one the intake and the out side exhuast? inside meaning closest to the engine and out side meaning closest to the batterey???
2009-04-06 01:49:47
#15
Yes, closest to the head is the intake.

billc - Thanks for your post over on the old forum. Got my MSS working perfectly. SR20 Forum - View Single Post - MSS configuration from scratch, for the love of God
2009-04-07 00:26:03
#16
Originally Posted by myprojectb13
Yes, closest to the head is the intake.

billc - Thanks for your post over on the old forum. Got my MSS working perfectly. SR20 Forum - View Single Post - MSS configuration from scratch, for the love of God


Glad it helped you! Wow, I went back and looked at that thread from 4 years ago. Pretty involved -- sure would have been helpful if Greddy provided instructions in some language other than Japanese.
2009-04-07 15:16:13
#17
thats soo true...follow some one on a other forum and locked out ma solonoids...had to brain storm to get it working again...theres sooooooooooooo much rthis thing can do
2009-06-21 02:44:39
#18
Excellent information
2009-07-04 06:52:42
#19
DOes anyone know how to wire the cams to the new rt v2 ecu?
2010-05-14 05:35:16
#20
I'm having a issue with my friends mss Install. For some reason I set the mss as directed on the post but when the car is on the rpm is show 0 on the display. My friend pre wired the solenoid side so I didn't see the wires on his they are set up. While setting up the mss I heard 1 solenoid clickin on and off repeatedly. The vvl doesn't turn on. Is the display suppost to show rpm reading? He has a jwt ve hq ecu ... I spliced into blue wire with orange strip pin#3 I believe ... He said it's a b14 ecu so I used all data to find it. What am I doing wrong? Does the ecu have no rpm output?
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top