All posts liked by unijabnx2000
Quick update on this build. The main flow path tubing was lightly polished, final tack welded, and then finish welded.
Tacked up and ready to burn
http://turbofx.net/wp-content/uploads/2015/04...
The FSM only specifies a shim on the driver/left side for preload adjustment. There is no Nissan part number available for the passenger/right side.
Here's the picture of the RS5F70 posted earli...
I was a little reluctant about posting my board, but considering this design didn't produce the best result and will likely meet the chopping block, I think its ok to share. This was made using a t...
Ok so while the controller is mostly been completed, a lot of testing is needed to ensure it is safe and functions though all sorts of conditions. So to have control over the conditions I will be b...
Found some time to take the roughed out parts and grind them to fit. Afterwards, they received a light polish and cleaning. Then the welder was fired up to tack it all together. Up next is the bell...
Ebay TriY header review/results thread
I did a write-up on my DIY differential install:
http://www.sr20-forum.com/driveline-tech/77303-installing-mfactory-helical-differential-rs5f32v.html
I drove the car at a RallyCross on Saturd...
I personally enjoy a thuggish organizer. I mean I love doing hood rat activities, like watching @Whitestevefroct rip a planter out of the ground while drunk and hand it to Mark's GF.
The Convention will move forward regardless and big surprises is in the works so if you are there at this years convention, see you there, if not, oh well........
That is all I am going to say rig...
Here is the setup that Doug Fab fabricated for Maria. He used a regular "tee" setup because a "Y" would not have fit with the setup.
https://farm9.staticflickr.com/8735/16694427108_f1473e8e3c_o....
Let's not make it a "roadcourse guys" vs "drag guys" situation here. The pure fact of that matter is that its a hell of a lot easier to organize a drag event then it is to make sure we can actuall...
Sadly, I read this. :(
and went
http://www.reactiongifs.com/r/saywha.gif
Rule of thumb...never swerve, get hit.
Hey Guys,
just to say that we are not just sitting here idly, and have been trying to work out what the issue is here.
originally, the issue with the test samples were clear and we have removed e...
yeah i dont think i'll be recommending anyone to go thru them for anything.. not only did they take 3 months to do 4 fucking hubs, but then the shit didnt even fit.. so now who knows how long its g...
oem spec-v TOB.. pretty nice they come with clips on them unlike the b13 ones..
http://i1317.photobucket.com/albums/t631/lynchfourtwenty/joshs/IMAG0156_zpsweiesbes.jpg
http://i1317.photobucket.co...
Roughed out the pie cuts w/ the bandsaw last night. Next I'll grind all the parts, test fit them, and regrind them as necessary. Once I'm happy with the fitment, the parts will get a light polish, ...
http://cdn.meme.li/instances/500x/52982953.jpg
If it turns out to be an issue for everyone, we will fix it (be it new bolts, or bolt collars, or a re-threaded bottom case)
I got all psyched up to do all this shit on my leaking distributor, bought $30 worth of seals, rings and gaskets at the Nissan dealership. Popped the dizzy off and noticed that all the leaking was ...
The price of the p12 cas is high...somewhere between $250-$300 bucks. I like to entertain myself with trying to make solutions for things like this. So for me....it keeps my busy. I dont personally...
OOOH, I see what you mean now. I didn't catch that at first. That could be an issue. I'll have to get back to you on this one by this weekend. I have a spare head I can mock everything up on. If it...
I was able to turn the pilot down to just under 33mm today. I also swapped over the drive and test fitting it on a stripped down head. So far so good. In car testing should take place in the next f...
Pretty cool, would be cool option for us AEM guys :)