Thread: Aftermarket seat brackets

Figured I'd start another thread about this to keep the other thread uncluttered.

You mentioned in that other thread that you were going to be making seat brackets.

What kind of timeframe are you looking at having that done?

I have had some interest in custom seat brackets for the P10 chassis. I could definitely design/fab custom brackets or design/fab something that allows use of the stock seat brackets if possible. I would need to get my hands on a stock seat and the dimensions for the aftermarket seat frame to get started. I'll know how long it will take once I get a look at these.

i have a custom seat bracket that slides, on top of the stock p11 rail. i bought the seat like this with the brackets. its for a sparco sprint jr seat. you can borrow it if you wish. i also have a spare driver side p11 seat you may borrow as well. im looking into getting a matching passenger seat in the future.

Im the one that asked about getting some brackets made since im down the street it would be conveniant. You said like 6 weeks but I just couldnt wait that long to get my recaros in. Trying to get my car ready for a meet in Cali so im having someone else do it.

I have a P11 under the knife right now and access to the seat rails are available. If you can send over the custom bracket, I can design something for your matching passenger side seat.



Gotcha...my lead times are long since I do this on the side. There are a lot of great fabricators here in the valley...if you ever need a recommendation, I would be glad to help

Yea no prob. If you need any p10 to test fit or something lmk.

Anymore updates to this? Like I said before, I'd like to get my Momo in there.

Nothing yet. I would need a stock P10 seat and the bolt pattern and height dims/specs for the Momo to get started.

I can probably get you the last ones. Shipping a seat to you would be costly.

Sent from my Galaxy Nexus using Tapatalk 2

Seat freight to/fro would definitely be $! I should have some time available in 4-5 weeks (work deadlines are keeping my busy till then) to check out some local P10s, measure the stock seat dims, and start design&prototype fab based on the aftermarket seat dims.