Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Adjustable B13 Rear LCAs, gauging interest.

+ Reply To Thread
Posts: 181-190 of 441
2012-03-22 03:01:26
#181
mo, i thought i recalled that as well. here is a thread talking about the topic: 'tubular' control arms..interest? - G20.net - Forums
2012-03-22 03:58:17
#182
Thanks for the link. I have a couple of other ideas floating around that allow for an adjustable control arm without using a rod end/heim joint/spherical bearing...just need to model them, compare, and figure out which design performs best.
2012-03-22 06:13:15
#183
i just think you may not get much interest because LoCo already makes adjustable UCA for pretty cheap. just 411,

btw i love your manifold, cant wait till i have enough saved up :-p
2012-03-22 17:01:49
#184
loco has only produced a couple of those control arms and has said he isnt planning on making more untill he gets more hardware to make them with. so at this time there is no options for these.
2012-03-23 00:34:21
#185
^ i was told because of lack of interest
2012-03-23 03:41:01
#186
I'm building the first set for my P11...once I'm satisfied with the design and performance, they will be available for sale for anyone who wants them. The designs incorporate stocked raw materials that are currently used for other parts in production...so made to order will be easy peasy
2012-03-27 10:18:22
#187
P11 stuff MmMmMmm
2012-03-27 19:20:24
#188
Originally Posted by javierb14
No problemo...thanks for sending those stock pieces over to work with! Let me know how they work out for you

Speaking of G20s...I started roughing out a model in solidworks tonight for an easily adjustable front upper control arm design, they look promising



So your design incorporates heim joints for the upper link?
2012-03-27 19:37:20
#189
Love the idea of people making parts for P11. The more options the better. Anything that won't clunk, squeak and rattle is good for me!

Brent
2012-03-27 19:37:24
#190
Originally Posted by javcrodgz
So your design incorporates heim joints for the upper link?


Originally Posted by javierb14
Thanks for the link. I have a couple of other ideas floating around that allow for an adjustable control arm without using a rod end/heim joint/spherical bearing...just need to model them, compare, and figure out which design performs best.


must have missed that part.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top