Welcome to the SR20 Community Forum - The Dash.
SR20 forum logo

Thread: Adjustable B13 Rear LCAs, gauging interest.

+ Reply To Thread
Posts: 371-380 of 441
2016-05-04 04:06:01
Originally Posted by shady45
@javierb14 when are trailing arms going to be madr for b13 nd at what price?

Originally Posted by jay121312
Any word on a front control arm for the b13?

I haven't had time to work on these projects lately...soon though. Most of my "free" time for the last 4 weeks has been consumed by a b14. I picked up relatively clean stock '98 200sx off Craigslist that needed/needs a little TLC to get it back on the road.

It has 200k mi, all bushings shot, and the clutch arm was busted. I'll make another thread, but this thing is turning into a bit of a restoration lol!

Fresh off the flat bed

Found out the drivers side axle was seized in the hub...the bfh and torch wouldn't budge it. Found a new puller that made it easy

Dropped the trans to remove the broken clutch arm

Cleaned it up, bent it back into place, and welded it back together

Decided to reinforce it

All buttoned up and ready to go back in. I threw in an Exedy OEM clutch in as well along with a new clutch cable.

Now that it's driveable, I've learned that the motor mounts, ball joints, tie rod ends, and control arm bushings are shot too! They're replacements will be here this week.

The fun continues!
2016-05-15 20:07:25
Originally Posted by BenFenner
I'm interested in a set of the Aluminum ones. I think I mentioned that earlier?
Four and a half years later, and I've finally installed them on the car. :o
2016-06-03 16:02:52
Sorry didn't read the full thread just a quick walk through, quick question how much degrees of adjustment this rods can allow you to correct?
2016-06-04 17:02:17
I have pictures showing how much distance you can get both negative and positive that I'll post eventually. It's about an inch either way. Which going from my experience doing alignments is probably worth up to plus/minus 10 degrees either way, or something insane like that. You will never need more adjustment that these things can offer.

And you can still use the eccentrics on top of these for even more adjustment.
Last edited by BenFenner on 2016-06-04 at 17-04-50.
2016-06-07 19:53:09
want a set, pm me or reply to your pms.
2016-06-09 12:22:14
@javierb14 ? Me tew.
2016-06-11 19:16:41
@javierb14. Same here.
2016-06-11 19:22:18
Four sets desired. Where you at, @javierb14 ?
2016-06-14 19:04:26

2016-06-14 19:21:24
Sorry zen he replied back to me in an email. I will forward the message to you.
Last edited by Kyle on 2016-06-14 at 19-23-12.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)

    Back to top