Thread: SR20 Turbo 02 Housing R&D

I have a compressor that came on my Avenir ( not sure if thats compat ) if so I could ship it to ya for free..

NO A/C Here

I would be interested in :

• Avenir/Bluebird compatible ( direct replacement )
• Divorced Pipe
• Car has no A/C
  

Check out this thread where one was made ( was vented back in but may give some ideas ) if not simply ignore im not a fabber

http://www.sr20-forum.com/members-rides/17388-b13-se-r-soon-vet-painting-engine-bay-not-done-yet-4.html

Tons of pics ( its a downpipe / o2 housing combined ) but maybe how the inside will have to be for divorced.

Awesome, thanks for the offer Can you pull the part number off that compressor?

We had something similar in mind for the divorced setup. With that design, my biggest concern is potential exhaust leaks with an open dump tube. We'll give it a go and see what works though. I can test out the Avenir setup along with the prototype housing on my mule of a b13. I have to pull it apart to test the SR20 Evolved manifold anyway.

I'll get the part # today, your B13 is sick... I know they make divorced o2 housings for the rwd sr20's as well let me see if I can dig up some pics.

got damn dude. that intake manifold is a monster.

Thanks...the entire IM was fabbed from .125 in. AL, it's a beast. I need to dyno it and see if this design actually works.

Also scored a P10 A/C compressor w/ low and high press. lines from a "you pull it" parts yard today...AC compatibility here we come

Quick update...materials have arrived! Check out the first prototype, it should have great flow properties



Joking aside, we now move on to the fixtures and then the real work begins. Unfortunately, there won't be any updates for about a week 'cause I'll be on vacation.

I'd run that! enjoy your vacation.

Awesome lol, Glad to see this progressing thought cant wait!

found a little more time to work on this today...going to try and squeeze in a prototype part into tomorrows mix

At that angle, it looks like it's going to be a tighter fit. Nice jig!