Thread: TP scales for .bin and .tcd

I have two different SR20VE tunes here, one is a "stock" .bin for a calum, the TP scale max is 68. On my Nismotronic, I've logged as high as 110. Are TP scales different between the two hardware platforms? Or is the .bin tune just a crappy tune?

def some differences, but the calum tunes were mostly just de files with adjusted injectors an mafs an such

Calum didn't mess with the tp scales as far as I know. Just resize your tp scales to suit you logged max tp.

the calum bins are base tunes to get you to a tuner who can adjust the TP, RPM and other scales to your set up.

Good to know, thanks

Just for future reference, the stock firmware (.bin) and NismoTronic (.tcd) have load scales (or as you call "TP") scales that are not always directly interchangeable.

The reason for this is because we divorce the load scale from the injector scaling values and then use a "MAF Load Factor" to change for differences in MAF changes only.