Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: TP scales for .bin and .tcd

+ Reply To Thread
Posts: 1-6 of 6
2014-01-08 22:45:00
#1
TP scales for .bin and .tcd
I have two different SR20VE tunes here, one is a "stock" .bin for a calum, the TP scale max is 68. On my Nismotronic, I've logged as high as 110. Are TP scales different between the two hardware platforms? Or is the .bin tune just a crappy tune?
2014-01-08 22:58:47
#2
def some differences, but the calum tunes were mostly just de files with adjusted injectors an mafs an such
2014-01-08 23:02:00
#3
Calum didn't mess with the tp scales as far as I know. Just resize your tp scales to suit you logged max tp.
2014-01-09 00:12:22
#4
the calum bins are base tunes to get you to a tuner who can adjust the TP, RPM and other scales to your set up.
2014-01-09 06:07:09
#5
Originally Posted by D-Unit121
the calum bins are base tunes to get you to a tuner who can adjust the TP, RPM and other scales to your set up.


Good to know, thanks
2014-01-13 19:25:20
#6
Just for future reference, the stock firmware (.bin) and NismoTronic (.tcd) have load scales (or as you call "TP") scales that are not always directly interchangeable.

The reason for this is because we divorce the load scale from the injector scaling values and then use a "MAF Load Factor" to change for differences in MAF changes only.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top