Thread: Scaling TP load points for Q45 MAF on SR20VE?

If you are all motor .. you don't need a boost gauge.

When you are WOT that will basically be as close to atmospheric as you are going to get.

1) Log your MAX TP/Load throughout the RPM range when you are WOT.

2) Make sure your last TP/load column is greater than your highest logged load value.

YES PLEEEEEEEEEEEASE, that would be ideal!

At this stage it's RT, though will be SA once I feel more confident.

PM sent.

Your PM box is full.

I would HIGHLY suggest converting over to the SA version since the RT version is no longer being developed.

Just download it and please follow the instructions on how to update to SA.

NIsmoTronicSA Download

Hi, PM box cleared.

Started using SA. WOW!

Possible to get that info from you?

Also what MAF factor would you start with, or is there a value?

Shoot me over an email using the web site's contact us form and I can get you a TCD sent over.

Just let me know your engine specifics and I can get you something to start with.

Done!

Looking forward to your response.