Thread: Tuning afc neo..

Doing my swap this weekend and I'm going to be running
ve injectors
de maf
94 g20 de ecu..(yes a calum ecu/jwt ecu would run better but i'm broke after everything, this is what I have )
I have a wideband ass well

1995 200sx
I understand our MAF is a hotwire type but when it comes to in and out what should I be putting? I see so many mixed opinions.. Also if someone could just explain as to what exactly it is... Thanks in advanced for all your guys help!

If your running a safc on stock ecu with stock de maf try these setting to get you stared. Hotwire in and out, 0 in 0 out or 1 in and 1 out. As for fuel adjustment each car is different but you can dial it in at the Dyno. Start with removing 10% high throttle and 15% low throttle across all NE points. You are going to need a wideband o2 sensor to do this right but this should get you started. Good luck.

FYI this is for a sr20ve swap with de ecu and maf. I assumed that's your plan based on your post.

Yeah, I have a wideband, for got to mention that lol (was middle of the night and i couldn't sleep lol) I'm going to street tune it and leave the dyno tuning till I can get some real parts lol. Thanks for the suggestion!

Ok good you should be able to dial the tune in with some time..