Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Aem ems ignition/injector phasing

+ Reply To Thread
Posts: 11-20 of 56
2013-01-21 20:57:06
#11
And how r those settings set using mazworx hall sensor with aem cdi module and aem pencil coils..
2013-01-21 21:15:24
#12
Originally Posted by SR20VVL
And how r those settings set using mazworx hall sensor with aem cdi module and aem pencil coils..


I believe Ashton is using the hall sensor.
2013-01-21 21:29:48
#13
Ashton help plz..
2013-01-21 21:32:01
#14
have you tried finding the instructions for it, or looking on the aem forums?
2013-01-21 21:46:37
#15
Yep I tried but unfortunately nil help found even with aem tech support I couldn't start the car & if I use the settings that mazworx provided with their sensor the car doesnt fireup..dunno am lost :upset
2013-01-21 22:44:20
#16
you have to set the timing (ignition sync)
2013-01-21 23:07:53
#17
I did nothing changed
2013-01-21 23:18:52
#18
I need to know what will b the setting for cam/crank edge trigger + sync trigger setting + ignition phasing + injector phasing
2013-01-21 23:24:12
#19
FYI ignition sync is unique to each setup


you have to use a timing light
2013-01-21 23:28:17
#20
K..I understand that.. but what if my ignition sync was correct and my other setup is wrong..the car wont start..
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top