Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: When exatcly should i be on the last column? n/a motor

+ Reply To Thread
Posts: 1-2 of 2
2012-10-20 18:26:25
#1
When exatcly should i be on the last column? n/a motor
When exactly should i be hitting the last column?

I dont think i should be on the last column the whole way from 3K to redline because the would require a very low tp scale.

Im guessing around 5 or 6K and up? (were you reach max VE/TP)
2012-10-20 21:44:16
#2
Originally Posted by Haulin200sx
When exactly should i be hitting the last column?

I dont think i should be on the last column the whole way from 3K to redline because the would require a very low tp scale.

Im guessing around 5 or 6K and up? (were you reach max VE/TP)



If you have the alpha N limit checked in the "MISC" tab of the software it will read off that last column of your fuel map anytime you are over the alpha-N limit table value in the "TP Scale" tab.

It is pretty common to be on the last column of the TP map anytime you are WOT on an N/A car so I wouldn't be toooo worried about it unless your logged TP values are WAY over what your last column value is.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top