Thread: LF ga16de xdf file

cant find it too, i end up using a sr20de bin and modify the entire map.

how did it work out for u?

I have a ga16 xdf file. it might work for you. it was from a half size ecu. There are also more than 1 xdf floating around. My ga16 ecu (im located in Canada) xdf was different from a california ecu. I will post up what i have later. You also can't use this .bin on a sr ecu since its from a half size but you can use all the data from the bin and transfer it over to a sr bin.

I could only find 1 of the 2 ga16de XDF's i had.

This one opened the stock rom off my half size ecu and also opened the ga16de bin calum had supplied once on the old forum.

I used it to open the stock rom/bin and then copied the info over to a sr20 ecu i had used a couple years ago that ran my old b13 ga sentra.

So would a gtir or det ecu work with a turbo ga16de

you could use a det ecu as a starting point i guess. It would run quite rich. A lot simpler to use something you can tune like a basic chipped ecu/nistune/nemu ecu.

Then you could use a DET.bin and then turn down the fuel.

thanx haulin200sx i just saw the xdf ...appreciate it, will check it out and let u know how it works out for me ....
thanx again man