Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Can i see pics of how you converted to MAP sensor

+ Reply To Thread
Posts: 11-19 of 19
2011-08-21 00:21:54
#11


that's mine...the little hose barb.
2011-08-21 17:56:24
#12
whats the box for?
2011-08-21 17:58:06
#13
That's the ECU. (Megasquirt in his case.)
2011-08-21 18:23:38
#14
oh ok
2011-08-21 18:52:27
#15
You guys need the intake temp sensor after the throttle body, unless I'm seeing everything wrong on every honda, toyota, nowadays.
2011-08-22 02:00:26
#16
Originally Posted by David
You guys need the intake temp sensor after the throttle body, unless I'm seeing everything wrong on every honda, toyota, nowadays.


neither is wrong... were converting from maf to map. our throttle bodies/ intake manifolds dont have provisions for map/air temp. as long as the map is connected to vacuum and the air temp sensor is next to the throttle body, everything is fine.
2011-08-23 02:52:36
#17
Jaja mercado.. Nop.. You can setup via vac!
2011-09-22 04:15:27
#18
do you have a start up cal file on this,im about to convert also to MAP. I was wondering if anyone has one. I have the AEM 6600, bluebird motor w/ 550 injectors
2011-09-22 05:09:27
#19
Originally Posted by compturbosredB13
do you have a start up cal file on this,im about to convert also to MAP. I was wondering if anyone has one. I have the AEM 6600, bluebird motor w/ 550 injectors


aem has 2 cals for nissan maps, maf and map cals so it should be there, then just do the wizard for your injectors, if your injectors arent on the wizard then you have to manually enter the battery offset and change the size by right clicking on the fuel map which will automatically change the figures on the inj map
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top