Thread: Timing Maps for Tuning

+ Reply To Thread

First

Last

Posts: 91-100 of 156

Search Thread

2011-02-20 17:36:41

#91

supercowboy Online/offline status of supercowboy is unknown

Member

Join Date: 2008-05-05
Location:
Posts: 237
Trader Score: 1 (100%)

Originally Posted by Will

right, z32 and 370s at 4 bar for the moment. I have some 740cc nismos about to go in.

I am a little concerned with the MAF voltage, its maxing out around 4.3v, which seems rather high. Does the z32 go to 5 or 6v?

I suspect a boost leak off of the manifold somewhere, the IC piping is fine. My a/f ratio is perfect so its hard to believe a boost leak is happening, but maybe.

your tp will drop when going up on injector size. tps voltage is fine. I see alot of cars with tps in the low 4 volts. Ive seen some cars stay in the high 3 volts even with a new tps.

0 Likes

Be the first to like this post.

I am a Nistune Dealer

Reply Reply With Quote

2011-02-20 17:41:11

#92

Will

Deficit in Attention

Join Date: 2007-12-11
Location: Jupiter, Florida
Posts: 2,332
Trader Score: 6 (100%)

Originally Posted by supercowboy

your tp will drop when going up on injector size. tps voltage is fine. I see alot of cars with tps in the low 4 volts. Ive seen some cars stay in the high 3 volts even with a new tps.

Cool, thanks a lot for the input.

I find it strange that i'm maxing out my 370s at 4 bar at like 98% duty only running 11.5psi when I only hit 86% making 286whp on the dyno. I suppose it was hotter at the dyno and I am tuning super rich...

0 Likes

Be the first to like this post.

White '92 NX2000 - JWT PP & B15 Disk, Hypercoil Gen2 damped by Koni Yellow Sports NX Thread

Black '95 200sx SE-R T28 Turbo Lowport 286whp/245wtq 12.306 @ 113.55 200sx Thread

Originally Posted by wnwright
I'm sorry I'm an engineer. I'm looking at the math.

Reply Reply With Quote

2011-09-20 00:51:18

#93

eder_45

Member

Join Date: 2009-06-17
Location:
Posts: 74
Trader Score: 9 (100%)

Timing maps SR20VE

Timing maps for SR20VE with SR16 CAMS non N1?

0 Likes

Be the first to like this post.

93 SE-R B13 BLACK-95 SE-R B14 GREEN
93 SE-R B13 RED-01 SE SR20DE RR WHITE
04 SE-R SPEC-V WHITE-97 SE-R B14 SILVER
99 SE-L SILVER-92 SE-R BURGUNDY-99 SE-L SILVER
00 SE SR20 RR GREEN-93 NX2000 BLACK

Reply Reply With Quote

2011-10-12 17:36:36

#94

joelosr20

VVL Lover!

Join Date: 2008-03-15
Location: The Island of Enchantment and Racers!
Posts: 222
Trader Score: 0 (0%)

^^ need that 2!!! i made one myself but need to compare to others as a guide!

0 Likes

Be the first to like this post.

My Car ran 14.3@97mph (183WHP 143TQ) >> Stock Internals SR20VE, Stock DE Flywheel, Gspec crank Pulley, ACT HD PP and Street Disk, PVC Intake, Tri-Y Header, 2.5 Exh cut-out, Chipped Alfsentra ECU.

Reply Reply With Quote

2011-11-02 03:02:25

#95

venom2727

Member

Join Date: 2007-12-17
Location:
Posts: 109
Trader Score: 0 (0%)

keep this alive ....any timing map for the eder 45 asked for?

0 Likes

Be the first to like this post.

Reply Reply With Quote

2011-11-02 03:25:51

#96

Vadim

Administrator

Join Date: 2007-12-11
Location: VA
Posts: 16,221
Trader Score: 48 (100%)

N1 and SR16 should be fairly similar, if anything N1 might have even less timing due to higher lift and duration.

0 Likes

Be the first to like this post.

00 G20t KH3- Loller Rocker + GT28 + 6 Speed
05 Legacy GT - Big 16G @13psi + Up Pipe + Downpipe
12 Outback 2.5i Premium - Stock

Reply Reply With Quote

2011-11-23 00:16:27

#97

RIP LAMAR

Member

Join Date: 2010-05-16
Location:
Posts: 59
Trader Score: 0 (0%)

Anybody have a timing map for a sr20det it has cp 8-5-1 ,740cc,s3 cams,aem Or can tell me where it should be bottom end if fully built .

0 Likes

Be the first to like this post.

Reply Reply With Quote

2011-11-23 01:19:28

#98

Vadim

Administrator

Join Date: 2007-12-11
Location: VA
Posts: 16,221
Trader Score: 48 (100%)

Out of the specs you gave us only two things matter. 8.5cr and S3 cams. It should fairly similar to any DET map though.

0 Likes

Be the first to like this post.

00 G20t KH3- Loller Rocker + GT28 + 6 Speed
05 Legacy GT - Big 16G @13psi + Up Pipe + Downpipe
12 Outback 2.5i Premium - Stock

Reply Reply With Quote

2011-11-23 16:21:07

#99

ivanorcan

Member

Join Date: 2009-10-21
Location: Alajuela, Costa Rica
Posts: 256
Trader Score: 1 (100%)

Anyone, with a Basemap for a AEM EMS? i was looking at the Base calibration and the timing map look weird... with negative numbers and things like that... any help? Is for a SR20DE

0 Likes

Be the first to like this post.

1996 Nissan 200sx SER
3" WAI + K&N Filter, 20V Header, 3" Exhaust + 3" Glasspack +3" Dynomax Ultraflow silencer, SR20VE, Aeromotive FPR, 179whp & 146lb-ft. Wilwood 11" Brakes and SS Brake Lines. Front and Rear Strut Bars, KYB AGX+Road Magnet Springs, Rear Whiteline Adjustable Swaybar.
Proud member of the STRT and Shell croud.

Reply Reply With Quote

2011-11-23 17:04:41

#100

klassickrican Online/offline status of klassickrican is unknown

THINK POSITIVE!