Thread: Need your help SR20det pint out w10

I don't arrived to find the pint out ecu diagramm from ECU sr20det W10 95N15...

Please if you have the diagramm or a website... thanks!

try google

i try but i only find 200sx 180sx S14 etc... and i'm not very good in ENGLISH! so it's hard for me

NIStune
shows it as the same type of ecu..

Can someone please confirm this ECU part number - Pulsar Group of Australia

this says the difference is early model and late model the 95n11 is the earlier model so you should be able use the 95n11 ecu with no problems.

Ok 95n11 and 95n15 have same pineout but when i want tu buy a 95n11 on ebay and i say i had a 95n15 the seller told me that i can't use it...

I need the pinout because in wiring harness there is no lamda sensor (i don't know the english word it's the sensor on the turbo to manage ratio air/fuel). So i have to install one.
I don't know the pineout
Normally this sensor have to be hot (how i can i do that)