Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: How well is your MAF performing?

+ Reply To Thread
Posts: 81-87 of 87
2009-11-07 01:51:49
#81
His battery isn't going to read that high of a voltage unless it's running lol.
2009-11-07 23:09:23
#82
^^ Agreed.. that voltage reading is while running.. LOL.

But, I have never seen a car not start due to a weak MAF signal..
It would just give you a funky idle and then run like crap when driving...

But this thread is not to Diagnois his car.. ITS a MAF thread ! !
2009-11-08 00:12:58
#83
Sorry for being a bit off topic. It ended up being the maf fuse.
2011-08-08 16:16:51
#84
this thread should be stickied!

The maf voltages are not listed any where else on this board!
2011-10-23 17:43:01
#85
Skyline Owners Forum - View Single Post - Intermittent Misfire - from idle to top end

http://www.skylinesaustralia.com/forums/topic/113284-fixing-your-rb26-afms/

how to fix ur z32 style maf
Last edited by blackb13se-r on 2011-10-23 at 17-51-07.
2011-10-24 00:19:46
#86
did this today. it may have helped i'll have to see after a good drive. my problem only comes up after i've driven a good while. it's idling afrs right now are at 14.5-15 which is good when it gets hot the idle drops to 10.0-11.5 at idle. so we will see if it changes.
Last edited by blackb13se-r on 2011-10-24 at 14-00-31.
2011-10-26 01:39:09
#87
Great info
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top