Help with tune for JWT C2
Hi all,
I have just put in some JWT C2 cams, plus valve springs and stuff, I haven't raised the compression.
My other mods are extractors, cold air intake, uprate leads, etc.
I have a daughterboarded ECU, done by PLMS (much like the Calum board), and was wondering if anyone is able to help me with some sort of tune in the form of a bin that will be better than the stock AU SR20DE tune? I would appreciate any help that can be offered.
My cam profile is 275 degrees duration, 12.7mm (0.500") lift.
Thank you all.
-Timbo
I have just put in some JWT C2 cams, plus valve springs and stuff, I haven't raised the compression.
My other mods are extractors, cold air intake, uprate leads, etc.
I have a daughterboarded ECU, done by PLMS (much like the Calum board), and was wondering if anyone is able to help me with some sort of tune in the form of a bin that will be better than the stock AU SR20DE tune? I would appreciate any help that can be offered.
My cam profile is 275 degrees duration, 12.7mm (0.500") lift.
Thank you all.
-Timbo
Be the first to like this post.
Back to top
