Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: The Most Powerful Engines Thread. (Dyno Thread for Powerful Cars and Tuners)

+ Reply To Thread
Posts: 71-80 of 108
2010-05-19 21:38:53
#71
SR20VE-T/RWD
GT4294
655hp@20psi 8500 redline, some ignition misfire above 6k. you can see on the next pull @24psi, it spun the tires on the dyno and stopped reading, but was on an average of 112hp more across the board.

2010-06-17 21:47:51
#72
New high for me. 157 whp and 128 torque

93 octane - cams, header, intake, exhaust, JWT ECU, Apexi SAFC II



I love it.
2010-11-20 17:25:16
#73
93 oct, 17psi, U13 bb, modified disco potato, protech manifold, map & iat

2011-01-08 19:46:10
#74
UKDM 99' spec N15 GTi - roller rocker 10:1 DE

163whp (196bhp) @ 6400rpm & 150wtq (180lb-ft) @ 5400rpm - standard ECU 6950 rev limiter

Engine
Tomei Poncams 260'
ASP 4-2-1 header with 3’ downpipe
MIJ 2.25'' stainless steel mandrel cat back system
Edge Racing 2.5’' resonator decat
2 piece UR lightweight pulleys
FSE fpr set to 4bar
Shell VPower 99ron
PiperX panel filter with cold air feed
2.5’ induction hard pipe kit
Magnecor KV85 HT leads
NGK Iridium spark plugs
Ignition timing at 19*
XTD prolite flywheel & stage 2 clutch




david
Last edited by BenFenner on 2012-05-29 at 15-52-07. Reason: Restore image from backup.
2011-01-19 21:57:49
#75
^^^
HAHAHA, Dot-Matrix.
2011-01-25 16:13:48
#76
print is print ol boy

david
2011-03-06 22:22:49
#77
191.79whp
UKDM RR DE.
`CatCams` 518 with 298/288 duration 11.6mm lift.
16VE Pistons giving approx 12.3:1 C.R
Eagle rods
ACL Race bearings
Mildly ported head with Ti retainers / springs
64mm throttle body
Internally polished inlet manifold
Thermo spacers
Fuji header
2.25" Catback
Decat
Meziere electric water pump
PAS delete
Underdrive crank pully / alloy ALT pully
NISMO AFPR
OE 259cc injectors
NISTUNE ECU with 8200rpm rev cut
VZR N1 close ratio LSD gearbox
11lb `Competition Clutch` steel flywheel
4 Puck `Competition Clutch` racing clutch


Last edited by rowdy-gti on 2011-03-13 at 19-30-40.
2011-06-02 12:18:38
#78
UKDM '93 P10 eGT 10:1 lowport SR20DE

159 WHP (117 Kw) @ 6300 rpm & 138 WTQ (187 Nm) @ 5500 rpm
Dynapack Evolution 4022 4WD

JWT S4 266'
SSAC 2.5"
Custom 2.25" Magnaflow
P11 MAF & rubber
JWT Pop charger
Throttle body spacers
NGK Iridium spark plugs
370cc DET injectors
Walbro fuel pump
Fidanza flywheel
UR two pulleys set
Ignition timing at 15*
NIStune Type 3 board
No o2

4th gear ratio - 0.975 & final gear ratio - 4.375
87F (27C) temperature & 30% humidity




There is still plenty of room for improvement:
- way too rich after 6000 rpm
- some ugly dips at 2000 rpm
- safety timing for A95 fuel (something like US 89 or maybe worse..)

Next dyno day is planned for later this summer. Hopefully it will bring better results for me, although current are not that bad as well.

ImageShack Album - 3 images
2011-06-02 13:43:28
#79
1996 Autech Pulsar GTi Highport

186whp/157wtq

JWT C3 Camshafts
BC Valve Springs
1994 IES Ported and Polished 53J Highport Head
Mazworx 4-1 Header
3" Catback
11:1CR

05/03/2011
2011-11-08 19:18:18
#80
S5 cam'd lowport de
mods include:
hotshot cai w/jwt pop
hotshot gen5 header
3" catback w/oem cat
jwt ecu
jwt S5 cam's @0/0
jun u/l flywheel
ur underdrive pullies
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top