Thread: Nismotronic SA wideband connection

I just installed a Nemu SA ecu into my b13 and I'm having issues with wideband o2 connection. I have tried both direct wideband via my pc and aux input 0v-5v. When using direct wide band the tuner code/nismotronic software goes unresponding. When connected via aux/adc input the values are not reading correctly. All the info I find online is for nismotronic RT and my software does have any of the same setting menu options. I'm using an LM1 wideband and it is working perfect and communicates with my pc without issue. I have been data logging with it for years and need it to communicate with my Nemu ASAP. Thanks

Contact John @JKTUNING

you can dial the 0-5v in by playing with the offset..

I sent JK the same info in an email and got some help but still not corrected. The software continues to go unresponding during direct wide band.


As for the offset options, I have been using this function but it seems to me the wideband functions are not as easy to use as they appear. I have been logging wideband o2, rpm and other item on this lm1 since innovative came out with it(yeah it's that old and still works perfect). Thanks for the replies guys.

this should be fixed now.


note: you may need to manually set the com port the first time.

I see we have a software update....good stuff. I was able to reprogram my lm1 output and use a custom adc input to match my lm1 and now all is well. Thanks again for all the replies.

The direct wideband should be fixed in the latest version.

If you are using a permanent install, I highly suggest using the ADC box.