Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: TunerCode Set Launch Demonstration

+ Reply To Thread
Posts: 11-20 of 30
2012-06-24 00:36:36
#11
Originally Posted by Payu
What can cause that this feature its not working on my car I am also having trouble adjusting the two step via nismotronic software


To adjust the two step it needs to be updated with the IGNITION OFF.

Then turn the IGNITION ON and it should set it to your current setting in NismoTronic.

Once the car is started, the 2 step cannot be changed.

The Set Launch feature is done as follows.

1) Put Car in Gear (Gear switch must be present and working!)
2) Turn IGNITION ON (NOT START)
3) Depress throttle untill desired RPM is displayed on the tach
4) Take the shifter OUT OF GEAR
5) Start car
2012-06-30 00:36:38
#12
Originally Posted by dfddfd2
What are you guys using for the launch speed limit?

Thanks,
Dave


I'd like to know this too! Anyone else want to chime in?
2012-06-30 00:50:51
#13
How can I get this for my. B13
2012-06-30 01:31:30
#14
Originally Posted by alex951
How can I get this for my. B13


Purchase NismoTronic RT
2012-06-30 06:28:16
#15
From were in new to the Nissan fam nd I will like to know were I can. Purchase it
2012-06-30 13:27:59
#16
Originally Posted by alex951
From were in new to the Nissan fam nd I will like to know were I can. Purchase it


Here you go: NismotronicRT Tuning Package
2012-07-01 14:18:58
#17
Originally Posted by b13nissan
Originally Posted by dfddfd2
What are you guys using for the launch speed limit?

Thanks,
Dave


I'd like to know this too! Anyone else want to chime in?


Has anyone played with the launch speed limit?
2012-07-05 12:43:53
#18
Does anyone actually use the launch limiter?
2012-07-05 14:39:34
#19
Yes I always use the lowest value that I think is 1.2mph
2012-07-05 15:13:34
#20
Originally Posted by dfddfd2
Does anyone actually use the launch limiter?


I used to use it when I was on street tires. it bounces once at ~4000rpm before I get full traction (and the mph limiter releases)
Last edited by blo0d on 2012-07-05 at 15-13-50.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top