Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: VVL Activation via TunerCode (Stock DE ECU)

+ Reply To Thread
Posts: 51-60 of 74
2013-09-21 18:02:28
#51
Originally Posted by JKTUNING
Originally Posted by circa.13
I was going through my program and its been updated since this thread has been made. I am not 100 percent sure I am doing this correct. I was trying to follow what was posted in the picture.


If you are using the NismoTronicSA software then you will want to go to OUTPUTS -> GENERAL OUTPUTS and then pick the output you want to use from the drop down an then select the parameters you want to use for activation (RPM, TPS, ECT).

Here is an example of using the nitrous section to control an output, it is the same idea on all of the general output programming.


I am trying to wire it up to activate my VVL with the AIV and EGR. This is how I have it right now but I am sure I have it wrong lol



2013-09-21 19:59:11
#52
@lynchfourtwenty since you've helped me a million times I figured you would be able to hook ot up too lol.
2013-09-21 20:00:37
#53
Originally Posted by circa.13
I am trying to wire it up to activate my VVL with the AIV and EGR. This is how I have it right now but I am sure I have it wrong lol





What you have pictured is actually perfect.
2013-09-21 20:04:50
#54
yeah i see nothing wrong with how you have it..


what i like to do is set the rpms at like 1500 to 2000 rpm, then hook a test light up to the wire im trying to use for activation, i clamp the neg of test light to the wire im using for vvl then put the pointer end of test light in the + of the cars battery, then i just give it a little gas to the rpm i set and the light should come on an go off like i set it to in the program.
Last edited by lynchfourtwenty on 2013-09-21 at 20-06-11.
2013-09-21 20:17:52
#55
My battery is the hatch lol

I dont mess with the delay timer or reset timer and none of the check boxes under it?
2013-09-21 20:22:45
#56
not really for vvl, u might disable it on limiter but idk, havent played with that
2013-09-21 20:53:00
#57
Another way to test it is to just do it with TPS .. set it to 20% on and 15% off and upload with the KEY ON ENGINE OFF.

Then go out to the engine bay and manually move the throttle plate and you will hear the solenoids click on and off as you move the throttle through the range.
2013-09-21 21:03:08
#58
lol i suppose that'd work too eh
2013-09-21 21:39:06
#59
Originally Posted by JKTUNING
Another way to test it is to just do it with TPS .. set it to 20% on and 15% off and upload with the KEY ON ENGINE OFF.

Then go out to the engine bay and manually move the throttle plate and you will hear the solenoids click on and off as you move the throttle through the range.

This helped out perfectly! I was in the middle of one more reply then I saw this. That was much easier then messing with the RPM then getting into the car and revving it while listening for the click.

All is well finally. The way I set it up in the image wasn't working. The program didn't like the activation being RPM AND TPS, they conflicted with each other.

So future notes for the next person: activate with either the RPM or TPS but not BOTH.
Last edited by circa.13 on 2013-09-21 at 21-41-03.
2013-09-21 21:42:06
#60
well you had it set to half throttle lol, 1% for testing would of worked i bet
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top